Panasonic DMC-TS5D Owner's Manual page 256

LCD monitor
The LCD monitor becomes darker or brighter for a moment.
•
This phenomenon appears when you press the shutter button halfway to set the aperture value and
does not affect the recorded pictures.
•
This phenomenon also appears when the brightness changes when the camera is zoomed or when
the camera is moved. This is because of operation of the automatic aperture of the camera, and it is
not a malfunction.
The LCD monitor flickers indoors.
•
The LCD monitor may flicker for a few seconds after this unit is turned on. This is an operation to
correct flicker caused by lighting such as fluorescent lights, LED lights etc. and is not a malfunction.
The LCD monitor is too bright or dark.
•
Is [Monitor Luminance] active?
•
Perform [Monitor Display].
Black, red, blue and green dots appear on the LCD monitor.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
Noise appears on the LCD monitor.
•
In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not affect
the pictures you are recording.
Flash
The flash is not activated.
•
Is the flash setting set to [Œ]?
> Change the flash setting.
•
The flash cannot be used in the following cases:
–
When using Auto Bracket
–
Creative Control Mode
–
Panorama Shot Mode
–
[Scenery]/[Night Scenery]/[Handheld Night Shot]/[HDR]/[Sunset]/[Starry Sky]/[Glass Through]/
[3D Photo Mode] (Scene Mode)
–
When recording in [Burst] (except for [
Flash is activated several times.
• The flash is activated twice when Red-Eye Reduction
•
Has [Burst] (P111) in the [Rec] menu been set to [
(P54)
(P53)
(P66)
(P72)
(P75)
(P84)
(P87)
])
- 256 -
Others
(P111)
(P66) has been set.
]?