Panasonic DMC-TS5D Owner's Manual page 130

∫
Using a card reader/writer (commercially available)
Preparation:
Close all other running applications.
Insert the card into the unit.
1
Select [Assist Data] on the [GPS/Sensor] menu, and then press [MENU/
SET].
2
Press 3/4 to select [Update], and then press [MENU/SET].
3
Press 3/4 to select [SD card], and then press [MENU/SET].
•
The "GPS Assist Tool" is copied to the card.
4
Turn this unit off and remove the card.
5
Insert the card into the card reader/writer (commercially available) that is
connected to the PC.
6
Launch the "GPS Assist Tool" with the PC.
For Windows:
Double-click [GPSASIST.EXE] stored in the [AD_LUMIX] folder of the card.
For Mac:
1
Double-click [GPSASIST.DMG] stored in the [AD_LUMIX] folder of the card.
2
Double-click [GPSASIST].
7
Click [Update] on the screen of the PC.
•
Proceed with the steps according to messages appearing on the PC.
When the update is complete, click [Exit].
•
Do not disconnect the unit from the PC until the data has been updated.
8
Remove the card.
9
Insert the card into this unit and turn the unit on.
•
The GPS assist data of this unit is updated.
GPS/Sensor
- 130 -