Sensors (Compass/Altimeter/Barometer) Are Operated - Panasonic DMC-TS5D Owner's Manual

Sensors (compass/altimeter/barometer) are
operated
Applicable modes:
The direction, altitude, and atmospheric pressure can be measured and recorded in the
recorded images.
•
If compass/altimeter/barometer are operated in the time settings
[Sensor Settings] will be set to [ON] automatically.
1
Select [Sensor Settings] on the [GPS/Sensor] menu, and then press
[MENU/SET].
2
Press 3/4 to select [ON], and then press
[MENU/SET].
• Exit the menu after it is set.
•
To switch the environment information screen, press
[DISP.] several times.
A Compass
B Altimeter
C Latitude
D Longitude
E Time positioning was performed
F Barometer
•
When [GPS Setting] is set to [OFF], the latitude/longitude and positioning timing are not displayed.
•
They keep working when this unit is turned off. If you do not wish the compass/altimeter/barometer
to keep working when this unit is turned off, set [Airplane Mode] to [ON].
¢
•
For motion pictures
recording are recorded.
¢ When recording using [MP4] or [FHD/60p/
, the direction, altitude and atmospheric pressure measured at the start of the
GPS/Sensor
]/[FHD/60i/ ]/[HD/60p/
- 135 -
(P28) at the time of purchase,
A
10
0ft
B
5
C
0
N 00' 00' 00.00
D
-5
E 000' 00' 00.00
E
GPS 10:00 DEC.1
-10
10:00 DEC.1.2013
(P53)
] in [AVCHD]
1013hPa
F
-24H 0
H