Table of Contents
Advertisement
F
(fast Fourier transform) An algorithm based on the Fourier theory that Soundbooth uses for filtering and
FFT
spectral displays. The Fourier theory states that any waveform consists of an infinite sum of sine and cosine
functions, allowing frequency and amplitude to be quickly analyzed. Higher FFT sizes create more precise results but
take longer to process.
Describes the rate at which a sound wave vibrates, measured in cycles per second, or hertz (Hz). A cycle
frequency
consists of a single, repeated sequence of pressure changes, from zero pressure, to high pressure, to low pressure, and
back to zero. A sound wave's frequency determines its pitch: high frequency equals high pitch, and low frequency
equals low pitch. (See also "Waveform measurements" on page 12.)
H
Cycles per second. A unit of measurement that describes the frequency of a sound. (See "frequency" on
hertz (Hz)
page 81.)
L
Measures the delay between user input and sound output from a computer. If latency is high, it produces an
latency
audible echo during recording, disrupting timing for musicians. To reduce latency, use sound cards with ASIO or
Core Audio drivers.
A signal processor that prevents audio from clipping. If the input signal exceeds the specified threshold level,
limiter
the output level remains constant even if the input increases in volume.
M
The process of finalizing audio for a specific medium, such as the web or an audio CD. Mastering consists
mastering
of several processing phases, with equalization and compression phases being the most essential. (To master audio
in Soundbooth, see "Mastering" on page 53.)
One thousandth of a second. (There are 1000 milliseconds in a second.)
millisecond (ms)
A common name for 1/8-inch plugs and jacks, sometimes known as minijacks. On the most common
miniplug
sound cards, miniplug jacks provide analog audio inputs and outputs.
To combine multiple audio sources or tracks and output them together. Though mixes are
mix (or mix down)
typically output to a stereo pair of channels, they can be directed to any number of channels (for example, one
channel for mono, or six channels for surround sound).
A monophonic signal, which contains only one sound source.
mono
N
A special type of expander that reduces or eliminates noise by greatly lowering signal levels that fall below
noise gate
a specified threshold. Noise gates are often configured to totally eliminate background noise during musical pauses.
You can also use these gates to silence pauses in speech.
A technique that shifts the frequency of dithering noise to minimize its audibility. (See also
noise shaping
"dithering" on page 80.)
To adjust the highest peak of a waveform so it nearly reaches the digital maximum, 0 dBFS, thereby
normalize
raising or lowering all other peaks accordingly. The Normalize feature in Soundbooth normalizes audio to 0.3 dBFS,
avoiding clipping while ensuring optimal volume.
SOUNDBOOTH CS3
81
User Guide
Advertisement
Table of Contents
