Allied Telesis Patch 89262-08 Release Note page 7

Patch 89262-08 For AT-8900 Series Switches
Patch 89262-08 for Software Release 2.6.2
C613-10402-00 REV H
PCR: 40510 Module: VRRP
A configuration generated with the create config or show config dynamic
commands could under some circumstances, include a
disable vrrp = <vrrpid> command even if VRRP was enabled. This issue
has been resolved.
PCR: 40516 Module: DHCP
While initialising a range, the switch acting as a DHCP server may release
a dynamic entry incorrectly. This issue has been resolved.
PCR: 40519 Module: SWI
When the STP mode was changed, all the static arps on the ports belonging
to the STP were deleted. This issue has been resolved.
PCR: 40520 Module: DVMRP
Multicast data could not flow from PIM to DVMRP on a PIM/DVMRP
border switch. This issue has been resolved.
PCR: 40522 Module: CLASSIFIER
If a create classifier command contained the ethformat parameter, the
resulting entry in a script created using the create config, or show config
dynamic commands could sometimes be incorrect. This issue has been
resolved.
PCR: 40530 Module: IPG
When both Load Balancer and Firewall were configured, the very first TCP
session was established after rebooting. Subsequent TCP session startup
packets may have been routed out to an incorrect interface causing sessions
to not be established. This issue has been resolved.
PCR: 40531 Module: VLAN
A customer port in one nested VLAN could be set to be a core port in
another nested VLAN. This issue has been resolved.
PCR: 40535 Module: SWMX
When a particular model of SFP is fitted, and a switch reboot occurs, the
switch could get locked in a reboot cycle, and never manage to finish
booting. This issue has been resolved.
PCR: 40537 Module: BGP
When the status of an interface changed, the BGP revaluation of IP routes
for redistribution (via the add bgp import or add bgp network commands)
was incorrect. This gave inconsistent BGP route tables depending on the
order of events. This issue has been resolved.
PCR: 40538 Module: IP6, SWI
Multicast data failed to be forwarded by PIM-SM if an MLD report was
received on the switch before the corresponding multicast stream had
arrived. This issue has been resolved.
7
Level: 2
Level: 2
Level: 2
Level: 2
Level: 2
Level: 2
Level: 2
Level: 2
Level: 2
Level: 2