Allied Telesis Patch 89262-08 Release Note page 11

Patch 89262-08 For AT-8900 Series Switches
Patch 89262-08 for Software Release 2.6.2
C613-10402-00 REV H
Features in 89262-06
Patch file details are listed in Table 3.
Table 3: Patch file details for Patch 89262-06.
Base Software Release File
Patch Release Date
Compressed Patch File Name
Compressed Patch File Size
Patch 89262-06 includes all issues resolved and enhancements released in
previous patches for Software Release 2.6.2, and the following enhancements:
PCR: 31225 Module: IPG
While the switch was set with a CIDR interface address, when it received an
ECHO request with a network broadcast destination address for a class C
network, the switch sent the ECHO reply packet. Also, the switch
forwarded the ECHO request packet using a broadcast MAC address. These
issues have been resolved.
PCR: 40008 Module: NTP
When the device operated in NTP Client mode, the SHOW TIME command
sometimes displayed the incorrect time. This issue has been resolved.
PCR: 40075 Module: OSPF
Total exception errors occurred when the OSPF DEFAULTROUTE was set
to from ON to OFF. This problem has been resolved.
PCR: 40123 Module: OSPF
OSPF did not refresh a network LSA when it received a LSA with errors
from another vendor's device. This has now been fixed.
PCR: 40261 Module: PIM4
PIM counters were not totalling up correctly for erroneous packets if the
type of PIM packet was not known. This issue has been resolved.
PCR: 40266 Module: IPSEC
Out of sequence IPSEC packets could cause a switch reboot. This issue has
been resolved.
PCR: 40284 Module: PIM
When PIM-SM was configured and a very large number of IGMP v2 joins
were received, a switch reboot could occur. This issue has been resolved.
PCR: 40321 Module: ENCO, IPSEC
When expirykbytes was set to a low value in the IPsec policy, it was
possible that a memory leak could occur if heavy IPsec traffic was being
89-262.rez
12-Aug-2004
89262-06.paz
274040 bytes
11
Level: 3
Level: 3
Level: 2
Level: 2
Level: 4
Level: 2
Level: 2
Level: 2