Allied Telesis Patch 89262-08 Release Note page 24

24 enable ip igmp allgroup
Figure 1: Example output from the show ip igmp command.
IGMP Protocol
--------------------------------------------------------------------------------
Status ........................... Enabled
Default Query Interval ........... 125 secs
Default Timeout Interval ......... 270 secs
Disabled All-groups ports ........ 1,5,7
Interface Name .......... vlan2 (DR)
IGMP Proxy .............. Off
Group List ..............
Group. 238.0.1.2
Ports 3,11,23
Group. 224.1.1.2
Ports 2,11,23
All Groups
Ports 1#,11,23
Interface Name .......... vlan4
IGMP Proxy .............. Off
Group List ..............
No group memberships.
--------------------------------------------------------------------------------
Examples
See Also
Syntax
Description
Last Adv. 172.50.2.1
Last Adv. 172.50.2.1
Last Adv. 172.50.1.1
Table 9: New parameter in the output of the show ip igmp command.
Parameter
Disabled All-groups ports
To show information about IGMP, use the command:
SHOW IP IGMP
ENABLE IP IGMP ALLGROUP
DISABLE IP IGMP ALLGROUP
enable ip igmp allgroup
ENABLE IP IGMP ALLGROUP=[{port-list|ALL}]
where:
■
port-list is a port number, a range of port numbers (specified as n-m), or a
comma separated list of port numbers and/or ranges. Port numbers start
at 1 ad end at m, where m is the highest numbered Ethernet switch port,
including uplink ports.
This command enables the specified port(s) to behave as a multicast all-group
ports.
Refresh time 34 secs
Refresh time 130 secs
Refresh time 45 secs
(DR)
Meaning
A list of ports that are prevented from behaving as IGMP all-
group ports.
Patch Release Note
Patch 89262-08 for Software Release 2.6.2
C613-10402-00 REV H