Cpu Installation And Upgrading; System Clock Setting (Jp11, Jp8) - Advantech PPC-120 User Manual

5.2 CPU Installation and Upgrading

®
You can upgrade to a higher power Pentium , AMD or Cyrix processor at
any time. Simply remove the old CPU, install the new one, and set the
jumpers for the new CPU type and speed.

5.2.1 System clock setting (JP11, JP8)

JP11 and JP8 are used to set the CPU and PCI bus speeds respectively, to
optimize the system's performance. The system chipset will sense the JP8
setting to get the bus frequency, then adjust its internal timing. JP11 is
used to set the CPU and PCI clock. Refer to the CPU speed reference
table for instructions on adjusting the internal clocks according to the base
CPU speed.
Chapter 5 Jumper Settings and Connectors 49