Scan To Image - Brother DCP 350C - Color Inkjet - All-in-One User Manual

Scan to Image

When you choose Scan to Image, your document will be scanned and sent directly to the Macintosh
designated on your network. ControlCenter2 will activate the default graphics application on the designated
®
Macintosh . You can change the Scan configuration. (See Image (example: Apple
a
Load your document.
b
Press the (Scan) key.
c
Press a or b to choose Scan to Image.
Press OK.
d
Press a or b to choose the destination Macintosh
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination
®
Macintosh on the control panel.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the
cursor, then use a or b to enter the second digit. Repeat until you have entered all four digit of the PIN
number. Press OK.
e
Press Black Start or Color Start.
The machine starts the scanning process.
Note
• If you want to change between color and black and white scanning, choose color or black and white in the
scan type option on the Device Button tab of the ControlCenter2 configuration screen. (See
SCAN on page 135.)
• Scan type depends on the settings of the Device Button tab, Black Start or Color Start do not change
the settings.
Network Scanning (For models with built-in network support)
®
you want to send to.
®
you
®
PreView) on page 137.)
153
12
12