Brother DCP 350C - Color Inkjet - All-in-One User Manual page 160

Scan to OCR
When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh
designated on your network. ControlCenter2 will activate the OCR software installed on your Macintosh
®
(Presto! PageManager
processing application on the designated Macintosh
(word processing application) on page 139.)
a
Load your document.
b
Press the (Scan) key.
c
Press a or b to choose Scan to OCR.
Press OK.
d
Press a or b to choose the destination Macintosh
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination
®
Macintosh on the control panel.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the
cursor, then use a or b to enter the second digit. Repeat until you have entered all four digit of the PIN
number. Press OK.
e
Press Black Start or Color Start.
The machine starts the scanning process.
Note
®
• Presto! PageManager
• You can't choose color Scan type for this function. Black Start or Color Start do not change the settings.
®
) and convert your document into text for viewing and editing from a word
®
must be installed on your Macintosh
Network Scanning (For models with built-in network support)
®
. You can change the Scan configuration. (See OCR
®
you want to send to.
®
.
12
®
you
®
12
154