Brother DCP 350C - Color Inkjet - All-in-One User Manual page 36

Note
After you select a document size, you can adjust the scanning area further by clicking the left mouse button
and dragging it. This is required when you want to crop an image when scanning.
Pre-Scanning an image — to crop a portion you want to scan
The PreScan button is used to preview an image and also lets you crop any unwanted areas from the image.
When you are satisfied you are scanning the correct area, click the Start button in the Scanner Setup dialog
box to scan the image.
a
Load your document.
b
Choose the settings for Image Type, Resolution, Scan Type, Brightness, Contrast and
Document Size as needed.
c
Click PreScan.
The whole image is scanned into the PC and appears in the Scanning Area (1) of the Scanner Setup
dialog box.
d
Press and hold down the left mouse button and drag it over the portion you want to scan.
Scanning
1
2
2
30