Using The Scan Key; Scan To E-Mail (Pc) - Brother DCP 350C - Color Inkjet - All-in-One User Manual

Using the Scan key

Note
If you are connected using USB, see Using the Scan key (For USB cable users) on page 44.

Scan to E-mail (PC)

When you choose Scan to E-mail (PC) your document will be scanned and sent directly to the PC you
designated on your network. The ControlCenter3 software will launch the default E-mail application on the
designated PC. You can scan and send a black and white or color document from the PC as an attachment.
a
Load your document.
b
Press the (Scan) key.
c
Press a or b to choose Scan to E-mail.
Press OK.
d
Press a or b to choose the destination PC you want to use for E-mailing your document.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on
the control panel.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the
cursor, then use a or b to enter the second digit. Repeat until you have entered all four digit of the PIN
number. Press OK.
e
Press Black Start or Color Start.
The machine starts the scanning process.
Note
• If you want to change between color and black and white scanning, choose color or black and white in the
scan type option on the Device Button tab of the ControlCenter3 configuration screen. (See
SCAN on page 55.)
• Scan type depends on the settings of the Device Button tab, Black Start or Color Start do not change
the settings.
Network Scanning (For models with built-in network support)
4
4
4
83