Canceling A Broadcast In Progress; Additional Sending Operations; Sending Faxes Using Multiple Settings - Brother 9840CDW - Color Laser - All-in-One User Manual

Note
• The scan profile of the One-Touch,
Speed-Dial or Group number you chose
first will be applied to the broadcast.
• If the fax resolution of the fax number you
choose first is S.Fine and you enter a
stored I-FAX number,
Select Std/Fine will appear on the
LCD. Press Stop/Exit. Press Resolution
and choose Standard, Fine or Photo,
then re-enter the I-FAX number. If you
want to enter other numbers,
go back to c.
Canceling a broadcast in
progress
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
a
Press Menu, 2, 6.
The LCD will display the fax being dialed
(for example, #001 0123456789) and
the broadcast job number (for example,
Broadcast#001):
26.Remaining Jobs
a #001 0123456789
b Broadcast#001
Select ab or OK
b
Press a or b to choose the job number
you want to cancel.
Press OK.
c
Press 1 to clear the job number or 2 to
exit.
If you chose to only cancel the fax
currently being sent in b, the machine
will ask you if you want to cancel the
broadcast. Press 1 to clear the whole
broadcast job or 2 to exit.
d
Press Stop/Exit.
Additional sending
operations
Sending faxes using multiple
settings
Before you send a fax, you can change any
combination of these settings: contrast,
resolution, overseas mode, delayed fax timer,
polling transmission, real time transmission
or cover page settings.
a
Make sure you are in Fax mode
After each setting is accepted, the LCD
asks if you want to enter more settings:
5
22.Setup Send
Other Settings?
a
1.Yes
b
2.No
Select ab or OK
b
Do one of the following:
To choose more settings, press 1.
The LCD returns to the Setup Send
menu so you can choose another
setting.
If you have finished choosing
settings, press 2 and go to the next
step for sending your fax.
Sending a fax
5
5
5
.
37