Dialing Access Codes And Credit Card Numbers; Pause; Tone Or Pulse (Canada Only) - Brother 9840CDW - Color Laser - All-in-One User Manual

Chapter 8
i
If you selected B/W200dpi or
B/W200x100 in h, select the file format
(TIFF or PDF) that will be used to send
to your PC. If you selected
Color150dpi, Color300dpi or
Color600dpi in h, select the file
format (PDF or JPEG) that will be used
to send your PC. Press OK.
j
Do one of the following:
To store another group for
broadcasting, press OK. Go to b.
To finish storing groups for
broadcasting, press Stop/Exit.
Note
Fax Broadcasting is for black & white only.
Dialing access codes and
credit card numbers
You can combine more than one Quick-Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate from another long distance
carrier.
For example, you might have stored '555' on
Speed-Dial #003 and '7000' on Speed-Dial
#002. You can use them both to dial
'555-7000' if you press the following keys:
Hold down Shift as you press
Search/Speed Dial, 003. Hold down Shift as
you press Search/Speed Dial, 002 and
Black Start or Color Start.
Numbers can be added manually by entering
them on the dial pad:
Hold down Shift as you press
Search/Speed Dial, 003, 7001 (on the dial
pad), and Black Start or Color Start.
This would dial '555–7001'. You can also add
a pause by pressing the Redial/Pause key.
64

Pause

Press Redial/Pause to insert a 3.5-second
pause between numbers. You can press
Redial/Pause as many times as needed to
increase the length of the pause.

Tone or pulse (Canada only)

If you have a Pulse dialing service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have Touch Tone service, you
will not need this feature to send tone signals.
a
Press Hook.
b
Press # on the machine's control panel.
Any digits dialed after this will send tone
signals.
When you hang up, the machine will
return to the Pulse dialing service.
8
8
8