Brother 9840CDW - Color Laser - All-in-One User Manual page 216

2
Push the drum unit back in until it
stops.
n
Insert the original orange packing
material for the drum unit until as shown
in the illustration, and then close the
front cover.
200
o
Note
We recommend you repack the machine
on a table or desk.
Put the styrofoam piece marked
"FRONT" (1) into the lower carton (3), so
that the arrow cutout (4) points toward it.
Put the styrofoam piece marked "REAR"
into the lower carton so that the arrow
cutout (4) points away from it.
1
4
p
Using two people, place the machine
into the plastic bag and then into the
lower carton, matching the "FRONT"
piece to the front of the machine as
shown in the illustration in Step o.
q
As shown in the illustration, fit the two
foam pieces marked "FRONT" (4) to the
cardboard piece marked "FRONT" (7).
Fit the "REAR/L" (5) and "REAR/R" (6)
foam pieces to the left and right of the
cardboard piece marked "REAR" (8).
4
7
2
3
5
6
8