6.5.20 Removing/Replacing the Display Bezel
To remove/replace the Display Bezel, use the following the procedure;
1.
Remove the AC adapter and Battery Pack as described in Paragraph 6.5.1.
2.
Remove the round LCD bumpers at the top of the display (refer to Figure 6-24).
3.
Remove the left and right screws near the display hinges (note that the screw covers are not
identical).
4.
Remove four screws on the Display Bezel (Figure 6-24).
5. Pull out and remove the Display Bezel
Figure 6-24
Display Unit Disassembly
6-22
CN2
LCD Inverter
LCD ID Board
Field Service