Accton Technology SwitcHub-2s Installation Manual page 23

Indicates outgoing traffic traversing the port.
Transmit (TX) -
LED Activity Condition
BLINKING LIGHT ON
NO LIGHT OFF
Indicates incoming traffic entering the port.
Receive (RX) -
LED Activity Condition
BLINKING LIGHT ON
NO LIGHT OFF
Indicates that communications have been set to full-duplex
Full-Duplex (Full) -
operation for the indicated port.
LED Activity Condition
STEADY LIGHT ON
NO LIGHT OFF
Note: Full-duplex operation only applies to point-to-point access (e.g., when attaching
the SwitcHub to a server or to a workstation). When connecting the SwitcHub to other
compatible hubs, use a standard cascaded connection.
Indicates that communications have been set to 100Mbps.
100BASE-TX (100) -
(The transmission speed for any device directly attached to the SwitcHub
is automatically sensed at 10Mbps or 100Mbps.)
LED Activity Condition
STEADY LIGHT ON
NO LIGHT OFF
SwitcHub-2s User's Guide
Indication
Indicates the port is transmitting packets; blinking is
proportional to the traffic passing through the port.
No packets are being transmitted from this port.
Indication
Indicates the port is receiving packets; blinking is
proportional to the traffic passing through the port.
No packets are being received on this port.
Indication
Port is set for full-duplex operation.
Port is set for half-duplex operation.
Indication
Port is set for 100BASE-TX connection.
Port is set for 10BASE-T connection.
Hardware Description 2-9