Xerox 6100BD - Phaser Color Laser Printer Getting Started Manual page 6

DOCUSP 4.1
2
preparation for the DocuSP software installation. The PDF
version provided on the CD allows the DocuSP user to
print additional copies of this document as necessary.
o Using the lp utilities for Solaris (using lp.pdf): Contains the
syntax and commands for using the Unix lp print
command to submit jobs to the DocuSP controller.
o Using the lpr utilities for DOS and UNIX (using lpr.pdf):
Contains the syntax and commands for using the
command line lpr from either UNIX or DOS to submit jobs
to the DocuSP controller.
•
Product specific folder(s): One or more product specific
folders are available on the user guide CD ROM. The folders
contain documents such as the printer Operator Guide,
Installation Planning Guides for electrical and space
requirements, plus additional documents as necessary for the
smooth operation of your printer. Access the folder that
matches the printer type you are using.
♦ DocuSP On-line Help: The DocuSP software contains an on-
line Help system accessed from the various Help buttons and
pull-down menus on the DocuSP interface. In addition, a PDF
version of the content of the on-line Help is available on the
DocuSP by accessing the Help pull-down menu on the
DocuSP user interface (UI). To print on-line:
1. On the DocuSP UI, select the Help pull-down menu and
select Print Help Documentation.
2. Select a queue from the pull-down menu, and select OK.
3. Send the documentation to a hold queue in order to
program the job properties, or send the job to a queue with
the following job properties set as overrides:
o Sides imaged = 2-sided
o Finishing = none
o Paper stock = 8 1/2 x 11 or A4; drilled if the document
is to be placed in a binder.
NOTE: The Help documentation is over 300 pages.
4. In Job Manager, locate the job and program the job
properties. Then, release the job to print.
XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED