Backup And Restore - Xerox 6100BD - Phaser Color Laser Printer Getting Started Manual

DOCUSP 4.1
10
When a form is referenced by a job, the form pages are merged
with the pages of the job. A background form is submitted to the
DocuSP with a disposition of Save Form.
Background forms can be accessed through the queue properties
or job properties for merging with a job.
The directory location for saved background forms is set using
Setup, System Preferences, Save tab. The saved background
forms can be managed using the Background Forms Manager
under Administration. The Background Forms Manager displays
the name, size, pages, and creation date of each form, and
allows the forms to be sampled, imported, exported, and deleted.

Backup and Restore

Starting with DocuSP 4.1, a built-in backup and restore feature is
accessible from the GUI and DSPERU on diskette is no longer
provided. This new implementation of Backup and Restore
replaces DSPERU.
A user interface for Backup and Restore is available under the
System pull-down menu. The following options are available:
♦
Backup System: backs up the entire system to provide the
ability to restore the system in the event of a catastrophic
software or hard disk failure.
♦
Backup Configuration: allows for the selection of backing up
all configuration files, or selection of items such as queues,
color profiles, user TRCs, stock database, LCDS resources,
PostScript/PCL/TIFF settings, UNIX accounts and groups,
basic network information, and VIPP settings.
♦
Restore Configuration: allows for the restoration of saved
configuration settings.
NOTES: The following is additional information on the Backup
and Restore procedure. Use this information in conjunction with
the procedures documented in the DocuSP System Guide.
♦
The system backup can be saved to either the DocuSP
hard drive in the /XRXbackup directory, or to an external
disk or NFS mounted network drive. If saved to the
DocuSP hard drive, the /XRXbackup directory is the only
local internal location that should be used.
♦
If the system backup is saved to an external disk or
mounted network drive, the backup files must be copied
to the /XRXbackup partition on the DocuSP internal disk
prior to the Restore procedure. The Restore procedure
only searches the /XRXbackup directory for the system
backup files.
1. Open a terminal window and login as root.
XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED