Kyocera C8100DN - Color Laser Printer Operation Manual page 9

Operation Guide
Item Description
This allows you to verify the current settings for LDAP, TCP/
Network >
IP, IPP, IPP over SSL, AppleTalk, NetBEUI, IPv4, and IPv6.
General
For more information, refer to Advanced Page on page 34.
This displays the list of IP addresses and subnet masks
Network > IP
(IPv4) or prefix length (IPv6) that have access permission as
Filters
set under IP Filters (IPv4) and IP Filters (IPv6) on the
Advanced page. If no IP addresses have been designated,
then access permission will be granted to all addresses.
For more information, refer to Advanced > Protocols > TCP/
IP > IP Filters on page 36.
This allows you to verify the settings made under SNMPv1/
Network >
v2 and SNMPv3 on the Advanced page.
SNMP
For more information on SNMPv1/v2, refer to Advanced >
Management > SNMP > SNMPv1/v2c on page 43.
For more information on SNMPv3, refer to Advanced >
Management > SNMP > SNMPv3 on page 44
This allows you to verify the E-mail-related settings made on
Network >
POP3 and SMTP pages of the Advanced page.
POP3/SMTP
For more information on POP3, refer to Advanced > E-mail >
POP3 > General on page 42.
For more information on SMTP, refer to Advanced > E-mail >
SMTP > General on page 40.
This allows you to verify the settings made on the Logical
Network >
Printers page of the Advanced page.
Logical Printers
For more information, refer to Advanced > Protocols > TCP/
IP > Logical Printers on page 37.
This allows you to verify the settings made on the Netware
Network >
page of the Advanced page.
Netware
For more information, refer to Advanced > Protocols >
Netware on page 38.
This allows you to verify the current settings for secure
Security
protocols, IEEE802.1x, and IPSec. To change the settings:
For secure protocols, refer to Advanced > Security > Secure
Protocols on page 48; For IEEE802.1x, refer to Advanced >
Security > IEEE802.1x on page 49; For IPSec, refer to
Advanced > Security > IPSec > Rule1 (to Rule3) on page 50.
This allows you to verify the settings made on the Basic and
Device/Printer
the Printer pages.
For more information, refer to Basic Page on page 7 and
Printer Page on page 16.
This allows you to verify the settings made on the Basic and
Device/Printer >
the Printer pages.
APL. Filter
For more information, refer to Printer Page on page 16.
This allows you to verify the settings made on the Basic and
Device/Printer >
the Printer pages.
APL. Filter
For more information, refer to Printer Page on page 16.
Parameters
This allows you to verify the settings made on the Scanner
Scanner
page.
For more information, refer to Scanner Page on page 18.
COMMAND CENTER Pages
5