Kyocera C8100DN - Color Laser Printer Operation Manual page 21

Printer > System > APL. Filter
Printer > System > APL. Filter Parameters
Operation Guide
Item
*2
Tone
*2*4
Gloss Mode
*2
Color Mode
*3
KIR Mode
*3
EcoPrint Mode
*3
Resolution
*1 : Available on machines with the duplex printing.
*2 : Available for some color machines.
*3 : Available for monochrome machines and some color machines.
*4 : Available on machines which support Gloss Mode.
This page allows you to configure the APL. Filter. The APL. Filter is a function that
converts the received print data to the specified code and prints that data.
Item
Filter
Filter Name
Configure items that can be set differently between APL. Filters. You can specify fonts
and the text to be converted.
Item
Font
Start of String
End of String
Description
Sets Tone mode to Normal or Fine. The default setting is
Normal.
Sets Gloss Mode to High or Low. The default setting is
Low.
Sets Color Mode to Monochrome or Full Color.
Switches KIR (Kyocera Image Refinement) smoothing On
or Off.
Switches EcoPrint On or Off to control toner consumption
for saving the printing costs. The default setting is Off.
Changes the printing resolution.
Description
Switches the APL. Filter On or Off.
Selects the APL. Filter. You can select the ASCII to KPDL
conversion process.
Description
Specifies the fonts used for printing.
Specifies the character string with which the text to be
converted begins. Up to 15 single-byte characters can be
specified.
Specifies the character string with which the text to be
converted ends. The default setting is \f. Up to 15 single-byte
characters can be specified.
COMMAND CENTER Pages
17