Kyocera C8100DN - Color Laser Printer Operation Manual page 50

COMMAND CENTER Pages
Advanced > Management > Authentication
46
Item
LDAP
over SSL
Setting Authentication allows only the predefined users to access pages. In addition,
you can discriminate users by giving either the General User or Administrator privilege
to each user. Before using the authentication function, you have to define those users.
For how to define users, refer to Basic > Security > User Login on page 13.
Item
Authenticate
mode
Local
Authenti-
cation
Network
Authenti-
cation
Domain Name
Host Name
Server Type
Keyboard Login
NOTE: If the server type is [Kerberos (Win2000/2003)], only domain names
entered in uppercase will be recognized.
When a user sets authentication and accesses COMMAND CENTER, only the Start
page is displayed. The Login button is displayed in the upper left of the screen. Click it
to log in. When the user logs in with an Administrator account, hidden pages are
displayed and can be accessed. When the user logs in with a General User account,
the user can access the user's account page on Basic > Security > User Login and the
Description
Uses implicit mode for data communication. The server
provides services using the LDAP over SSL port (636).
Encryption is applied to any data communication using this
port.
Description
Specifies whether to enable or disable the authentication
function. To disable it, select Off. To enable it, select either of
the following.
Users are registered in this machine and one-to-one
authentication is performed between this machine and a PC.
This machine and relevant PCs need to be under the
management of the Windows domain network. Depending
on model, users registered in this machine must be the same
as those registered in the domain controller.
Specifies the domain name of the Windows domain network
when Network Authentication is specified in the preceding
item.
Specifies the domain controller name of the Windows
domain network when Network Authentication is specified
in the preceding item.
Specifies the authentication method used by the domain
controller when Network Authentication is specified in the
preceding item. Select NTLM when the domain controller is
Windows NT or Kerberos for Windows 2000 Server or
Windows Server 2003.
This determines whether login authentication is allowed via
the machine operation panel or not, despite the IC card
authentication is activated (using the IC card authentication
kit installed).
KYOCERA COMMAND CENTER