Kyocera C8100DN - Color Laser Printer Operation Manual page 28

COMMAND CENTER Pages
6.
7.
8.
9.
10.
11.
1.
24
Item
Page Separate
Number of
Destination
Destination List
Save to FAX Box
Name
Status
Save to FAX Box
Box Name
After you have finished setting all items, click Submit.
The screen returns to the Detail/Edit page.
After you have finished setting all items, click Submit.
The Requirement List page appears. Check that the status of the condition you have
set is On.
Repeat the above steps to set more conditions.
Finally, set the process for faxes that do not satisfy any of the conditions on the
Requirement List.
Click Advanced of Not complying with the requirements.
The Requirement List - Advanced page appears.
Set whether to execute forwarding processes for faxes satisfying no conditions by
setting the status to On or Off. When this item is set to On, set the subsequent items.
The procedure is almost the same as the procedure for adding a condition. See steps 2
to 6 as a reference.
After you have finished setting the items, click Submit.
This completes the settings for forwarding processes using a Requirement List.
Settings for Applying the Same Forwarding Process without Using a
Requirement List
Open the FAX/i-FAX > Common > RX/Forward Requirements > General page.
Click Advanced in RX/Forward Requirements.
Description
Specifies whether to split the fax into files as many as
the number of pages. Select On to split the fax.(This
item has effect when the forwarding destination is E-
mail, SMB, or FTP.)
Displays the number of registered destinations
displayed for the next item.
Displays a list of registered forwarding destinations.
Faxes are forwarded to all destinations displayed
here. For how to add a destination, refer to Setting
Destinations on page 25.
Saves received documents in a FAX box.
Displays the condition name.
Displays whether the condition is currently used.
Specifies whether to save faxes in a FAX box.
Specifies the FAX box to be used. When the selection
button is clicked, a list of registered FAX boxes
appears. The FAX box to be specified here must be
registered in advance. For how to add a FAX box,
refer to Document Box > FAX Box on page 33.
KYOCERA COMMAND CENTER