Kyocera C8100DN - Color Laser Printer Operation Manual page 17

Basic > Security > Device Security > Interface Block
Basic > Security > Device Security > Network Security
Basic > Security > User Login
1.
2.
3.
Operation Guide
This page allows you to restrict access from each interface.
Item
Network
USB Device
USB Host
Parallel I/F
Optional I/F
This allows you to enable communication with the printing system on a per-protocol
basis.
Item
SNMP v3,
NetWare,
AppleTalk,
NetBEUI, Raw,
IPP, IPP over
SSL, HTTP,
HTTPS, FTP
(Transmission),
FTP
(Reception),
SMB, SNMP,
SMTP, POP3,
LPD, LDAP,
WSD Print,
WSD Scan
When the authentication function is set on the Advanced > Management >
Authentication page (Local Authentication, depending on model), you must register
users and set access levels on this page.The available access levels are User and
Administrator.
One administrator account is registered by default.
Adding a New User Login
Open the User Login page.
Click Add and enter the information of the user.
Click Submit.
Description
Specifies whether or not to restrict access from each of the
interfaces on the left. Access from the interfaces that are set
to Block is restricted.
Access from the network interface cannot be restricted.
Access can be restricted on a per-protocol basis. Refer to the
next section.
Description
Specifies whether or not to restrict communication via each
of the protocols on the left.
The communication via the protocols that are set to Lock is
restricted.
The settings made on this page affect the protocol settings
on the Advanced page.
COMMAND CENTER Pages
13