Choosing A System Disk For Operations; Creo Spot Colors Xt Version 2.3.1; Deactivating Opi; Printing An Area Of 12 × 18 Inches - Xerox C8 - DocuPrint Color Inkjet Printer Release Note

13

Choosing a System Disk for Operations

Do not perform any operations, such as archiving, on disk C. Perform these operations on disk
D.

Creo Spot Colors XT Version 2.3.1

It is recommended not to work with Creo Spot Colors XT version 2.3.1XTension when you use
QuarkXPress.

Deactivating OPI

When you use Creo APR in the Spire CXP8000 color server make sure that the OPI XTension in
QuarkXPress is not active. Alternatively, in the Settings window > Preferences > General
Defaults, clear the Enable OPI Spire Support check box.
Printing an Area of 12 × 18 inches
Use paper that is 12.6 × 19.2 inches to print a full print area of 12 × 18 inches.

Web Viewer

To connect to the Spire CXP8000 color server from a Macintosh client workstation, use the
Spire CXP8000 color server IP address. You can obtain the IP address from the Spire CXP8000
by clicking on the DFE Monitor > Network tab.
The Web Viewer runs only on Explorer 5.0 browsers and higher and is suitable for both
Macintosh and Windows platforms.

Spire DC8000_COM Destination Profile

If a job that contains shades of blue does not print to your satisfaction—for example, the blue
shades appear too purple—use the predefined SpireDC8000_COM destination profile, and then
use the required emulation.
739-00031A-EN