Input Menu - Yamaha YMC S21 - neoHD AV System Owner's Manual

■ Adaptive DRC (dynamic range control)
Use this feature to adjust the dynamic range in
conjunction with the volume level. It improves
listenability at low volume.
Choice
Auto Adjusts the dynamic range automatically.
Off Does not adjust the dynamic range
automatically.
When "Adaptive DRC" is set to "Auto", this unit controls
the dynamic range as follows:
– If the volume setting is low: the dynamic range is
narrow
– If the volume setting is high: the dynamic range is
wide
Auto
Off
Input level
Volume: low
y
You can also adjust the dynamic range of the bitstream signal
sources (Dolby Digital, Dolby Digital Plus, Dolby True HD and
DTS signal) by using the "Dynamic Range" menu.
■ Lipsync
Use this menu to adjust the audio and video
synchronization.
If the connected TV is compatible with the
automatic lip sync function
The Lipsync mode of this unit is set to "Auto", and you
can fine-adjust the audio and video synchronization by
adjusting the offset value.
Control range: –240 through 0 to 240 ms (the range varies
depending on the result of automatic measurement)
Control step: 1 ms
If the connected TV is not compatible with the
automatic lip sync function
The Lipsync mode of this unit is set to "Manual". Adjust
the delay of the sound output manually to synchronize the
sound with the picture.
Control range: 0 to 240 ms
Control step: 1 ms
■ Dynamic Range
Selects the dynamic range adjustment method for
reproducing bitstream signals (Dolby Digital, Dolby
Digital Plus, Dolby True HD and DTS signal).
Functions
■ HDMI Audio Out
Use this menu to select whether to play back HDMI audio
signals on this unit or on the TV connected to this unit.
Auto
Off
Input level
Volume: high
Notes
• If "HDMI Audio Out" is set to "TV", the available audio signals
• When "HDMI Audio Out" is set to "TV" and the audio signals
• Even if "HDMI Audio Out" is set to "TV", the sound signals of
Use this menu to add new input sources or change the
input source settings you have made with the Initial Setup
procedure.
The choices indicated in bold are selected by default.
■ Add new input
When you connect new components to this unit or modify
the connections between this unit and other components,
use this menu to reflect the new connections. Follow steps
2 to 4 at "Step 3: Source Device Setup". (☞ P. 15)
Choice
Min/Auto (Min) Sets the dynamic range suitable for
low volume or a quiet environment, such as
at night, for bitstream signals (excluding
Dolby TrueHD signals).
(Auto) Adjusts the dynamic range for Dolby
TrueHD signals based on input signal
information.
Std Sets the standard dynamic range
recommended for regular home use.
Max Outputs sound without adjusting the
dynamic range of the input signals.
Choice
Amp Outputs HDMI audio signals from the
speakers connected to this unit.
TV Outputs HDMI audio signals from the
speakers of the TV.
vary depending on the specifications of the connected TV.
are output from the HDMI OUT jack, the speakers connected to
this unit output no sound.
some sources are not output from the HDMI OUT jack. In this
case, sound is output from the speakers connected to this unit.

Input menu

Setup menu
Functions
Functions
39
En