Enjoying Bluetooth™ Components; Pairing - Yamaha YMC S21 - neoHD AV System Owner's Manual

Use this feature to enjoy the music contents stored on your Bluetooth component (such as a portable music player)
without wiring between this unit and the Bluetooth component.
[Top menu] [Source menu]
Select "Listen" Select "Bluetooth"
[Playback] screen ck] screen
Start playback on your Bluetooth component.
To use this feature, you need perform the following
operations in advance.
• Connecting a Yamaha Bluetooth receiver (☞ P. 7).
• Pairing the desired Bluetooth component (see below).
• Establishing the connection between the desired
Bluetooth component and the Bluetooth receiver.
y
This unit supports A2DP (Advanced Audio Distribution Profile)
Bluetooth profiles.

Pairing

Pairing must be performed when using a Bluetooth
component with the Bluetooth receiver connected to this
unit for the first time or if the pairing data has been
deleted. "Pairing" refers to the operation of registering a
Bluetooth component for Bluetooth communications.
y
• You only need to perform the pairing operation the first time.
• Pairing requires operations on this unit and on the other
component with which Bluetooth communications are to be
established. If necessary, refer to the other component's
operating instructions.
To ensure security, a time limit of 8 minutes is set for the
pairing operation. You are recommended to read and fully
understand all the instructions before starting.
Enjoying Bluetooth™ components
[Pop up menu]
DSP Program
Audio Adjustment
Pairing
Connect
Disconnect
☞ P. 19
☞ P. 19
See below
Search for the last connected Bluetooth component
Disconnect the Bluetooth component
CONTROL
1
Turn on your Bluetooth component, then set
the Bluetooth component to the pairing
mode.
2
Select " " from the pop up menu and
Pairing
check that the Bluetooth component detects
the Bluetooth receiver.
If the Bluetooth component detects the Bluetooth
receiver, "YBA-10 YAMAHA" (example) appears on
the Bluetooth device list.
3
Select the Bluetooth receiver on the
Bluetooth device list, then enter the pass key
"0000" on the Bluetooth component.
When the pairing procedure is successful, "Pairing
Completed" appears.
Notes
• If any message appears, refer to "Troubleshooting". (☞ P. 50)
• The Yamaha Bluetooth receiver can be paired with up to eight
Bluetooth components. When pairing is conducted successfully
with a ninth component and the pairing data is registered, the
pairing data for the least recently used other component is
cleared.
35
En