Remote Control - Yamaha YMC S21 - neoHD AV System Owner's Manual

Remote control

IMPORTANT
• To control TV and source components, you need to make remote control connections (☞ P. 8) and set the remote
control code (☞ P. 13, 14).
• To control a TV or source component, aim the remote control at the remote control sensor of this unit.
Operating instructions for activities (☞ P. 18-35)
POWER
Turns on this unit or sets it to the
standby mode. (☞ P. 19, 43)
• MENU
• GUIDE
• EXIT
• PREV.
• CH u / d
These buttons work differently
depending on the currently
selected source component.
(☞ P. 21)
PAGE u / d
When the playback screen is
displayed
These buttons work differently
depending on the currently
selected source component.
(☞ P. 21)
When the virtual remote control
or contents list is displayed
These buttons scroll up/down the
virtual remote control or contents list.
MUTE
Mutes the audio output of this
unit.
■ Installing batteries in the remote control
4
1
2 2
Batteries (supplied)
Make sure you insert the batteries as
indicated by the polarity markings
(+ and –).
POWER
GUIDE
ENTER
PREV.
CONTROL
CH
PAGE
3
TV POWER
Turns on the TV or sets it to the
standby mode individually while this
TV
unit is turned on.
POWER
j / i / u / d /ENTER
MENU
When the GUI screen or the
virtual remote control is
displayed
Move the highlight with
select it with ENTER.
When the playback screen is
EXIT
displayed
BACK
These buttons work differently
depending on the currently selected
source component. (☞ P. 21)
VOL
BACK
Returns to the previous menu level.
Press and hold to return to the top
menu level.
MUTE
CONTROL
Turns on or off the pop up menu and
virtual remote control.
Press and hold to return to the top
menu level.
Turns on this unit. (☞ P. 43)
VOL +/–
Controls the volume level of this unit.
Notes
• Do not use an old battery together with a new one.
• Do not use different types of batteries (for example, alkaline
and manganese) together.
• If the batteries run out, immediately remove them from the
remote control to prevent an explosion or acid leak.
• Dispose of the batteries according to the regional regulations.
• If a battery starts leaking, dispose of it immediately. Be careful
not to let leaking battery acid come into contact with your skin
or clothing. Before inserting new batteries, wipe the
compartment clean.
Controls and functions
j / i / u / d and
5
En