Step 3: Source Device Setup - Yamaha YMC S21 - neoHD AV System Owner's Manual

Owners manual

Hide thumbs

Table Of Contents

Table of Contents

Initial Setup

Check whether the TV turned on and off

correctly.

• To cancel the TV Remote Code Test procedure, press

BACK.

• If the TV turns off during the test and does not turn back

on after waiting over a minute, turn the TV on using the

TV's remote control.

When the following message appears, select

"Yes" or "No - Try next code".

Select "Yes" to finish the TV Remote Code Test

procedure or "No - Try next code" to check another

remote control code. When you select "No - Try next

code", the test mode of the other code starts

immediately.

Note

This unit does not contain all possible codes for

commercially available TVs. If this unit does not turn the

TV off/on with the codes provided for that brand, select

"Learn Code" to recall the TV Remote Code Learning

screen (☞ P. 42) and program the remote control code

manually.

Select "Save" to finish the TV remote control

code setting and proceed with the Initial

Setup process.

When you want to set the TV remote control code again,

select "Change Code".