Yamaha neoHD YMC-700 Important Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
CAUTION 2 Keep these instructions.
3
Heed all warnings.
RISK OF ELECTRIC SHOCK
4 Follow all instructions.
DO NOT OPEN
5 Do not use this apparatus near water.
6
Clean only with dry cloth.
CAUTION: TO REDUCE THE RISK OF
7 Do not block any ventilation openings. Install in accordance
ELECTRIC SHOCK, DO NOT REMOVE
with the manufacturer's instructions.
COVER (OR BACK). NO USER-SERVICEABLE
8 Do not install near any heat sources such as radiators, heat
PARTS INSIDE. REFER SERVICING TO
registers, stoves, or other apparatus (including amplifiers)
QUALIFIED SERVICE PERSONNEL.
that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
• Explanation of Graphical Symbols
one wider than the other. A grounding type plug has two
The lightning flash with arrowhead symbol, within an
blades and a third grounding prong. The wide blade or the
equilateral triangle, is intended to alert you to the
third prong are provided for your safety. If the provided plug
presence of uninsulated "dangerous voltage" within
does not fit into your outlet, consult an electrician for
the product's enclosure that may be of sufficient
replacement of the obsolete outlet.
magnitude to constitute a risk of electric shock to
10 Protect the power cord from being walked on or pinched
persons.
particularly at plugs, convenience receptacles, and the point
The exclamation point within an equilateral triangle where they exit from the apparatus.
is intended to alert you to the presence of important
11 Only use attachments/accessories specified by the
operating and maintenance (servicing) instructions in
manufacturer.
the literature accompanying the appliance.
12 Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
Note to CATV system installer:
with the apparatus. When a cart is used, use
This reminder is provided to call the CATV system
caution when moving the cart/apparatus
installer's attention to Article 820-40 of the NEC that
combination to avoid injury from tip-over.
provides guidelines for proper grounding and, in 13 Unplug this apparatus during lightning storms or when
particular, specifies that the cable ground shall be unused for long periods of time.
connected to the grounding system of the building, as 14 Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
close to the point of cable entry as practical.
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product is
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifications found to be the source of interference, which can be determined by
turning the unit "OFF" and "ON", please try to eliminate the
not expressly approved by Yamaha may void your authority,
problem by using one of the following measures:
granted by the FCC, to use the product.
2 IMPORTANT: When connecting this product to accessories Relocate either this product or the device that is being affected by
and/or another product use only high quality shielded cables. the interference.
Cable/s supplied with this product MUST be used. Follow all
Utilize power outlets that are on different branch (circuit breaker or
installation instructions. Failure to follow instructions could void
fuse) circuits or install AC line filter/s.
your FCC authorization to use this product in the USA.
In the case of radio or TV interference, relocate/reorient the
3 NOTE: This product has been tested and found to comply with
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
the requirements listed in FCC Regulations, Part 15 for Class "B"
lead-in to coaxial type cable.
digital devices. Compliance with these requirements provides a
If these corrective measures do not produce satisfactory results,
reasonable level of assurance that your use of this product in a
please contact the local retailer authorized to distribute this type of
residential environment will not result in harmful interference with
product. If you can not locate the appropriate retailer, please
other electronic devices.
contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe
This equipment generates/uses radio frequencies and, if not
Ave, Buena Park, CA 90620.
installed and used according to the instructions found in the users
manual, may cause interference harmful to the operation of other The above statements apply ONLY to those products distributed by
electronic devices. Yamaha Corporation of America or its subsidiaries.
The following information applies for YMC-700 only.
COMPLIANCE INFORMATION STATEMENT
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that may cause undesired operation of this device.
See user manual instructions if interference to radio reception is suspected.
This equipment compiles with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio
frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated with at least 20 cm and more between the radiator and person's body (excluding
extremities: hands, wrists, feet and ankles).
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Change or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Precautions
Read this before using this unit.
To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.
1 Install this unit in a cool, dry, clean place away from direct 4 Do not clean this unit with chemical solvents; this might
sunlight, heat sources, and sources of excessive vibration, dust, damage the finish. Use a clean, dry cloth.
moisture, and/or cold. (Do not use/keep this unit in a car etc.) 5 Do not attempt to modify or fix this unit. Contact qualified
2 Locate this unit away from other electrical appliances, motors, Yamaha service personnel when any service is needed. The
or transformers to avoid humming sounds. cabinet should never be opened for any reason.
3 Do not expose this unit to sudden temperature changes from 6 Be sure to read the "Troubleshooting" section regarding
cold to hot, and do not locate this unit in an environment with common operating errors before concluding that the unit is
high humidity (i.e. a room with a humidifier) to prevent faulty.
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
If there should be color blotching or noise when used near a TV, move this unit away from the TV when using it.
Do not use this unit within 22 cm (9 inches) of persons with a heart pacemaker implant or defibrillator implant.
We, the manufacturer Yamaha hereby declare that the YMC-700 is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
The user shall not reverse engineer, decompile, alter, translate or disassemble the software used in this unit, whether in part or in
whole. For corporate users, employees of the corporation itself as well as its business partners shall observe the contractual bans
stipulated within this clause. If the stipulations of this clause and this contract cannot be observed, the user shall immediately
discontinue using the software.
Caution: Read this before operating your unit.
1 To assure the finest performance, please read this manual 19 The batteries shall not be exposed to excessive heat such as
carefully. Keep it in a safe place for future reference. sunshine, fire or like.
2 Install this sound system in a well ventilated, cool, dry, clean 20 When replacing the batteries, be sure to use batteries of the
same type. Danger of explosion may happen if batteries are
place – away from direct sunlight, heat sources, vibration,
incorrectly replaced.
dust, moisture, and/or cold. Allow ventilation space of at least
10 cm on the top, 5 cm on the left and right, and 5 cm on the
WARNING
back of this unit.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
3 Locate this unit away from other electrical appliances, motors,
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
or transformers to avoid humming sounds.
OR MOISTURE.
4 Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in an environment with
high humidity (i.e. a room with a humidifier) to prevent As long as this unit is connected to the AC wall outlet,
condensation inside this unit, which may cause an electrical
it is not disconnected from the AC power source even
shock, fire, damage to this unit, and/or personal injury.
if you turn off this unit by . In this state, this unit is
5 Avoid installing this unit where foreign objects may fall onto designed to consume a very small quantity of power.
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
FOR CANADIAN CUSTOMERS
– Other components, as they may cause damage and/or
To prevent electric shock, match wide blade of plug to
discoloration on the surface of this unit.
wide slot and fully insert.
– Burning objects (i.e. candles), as they may cause fire,
This Class B digital apparatus complies with Canadian
damage to this unit, and/or personal injury.
ICES-003.
– Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to
this unit.
IMPORTANT
6 Do not cover this unit with a newspaper, tablecloth, curtain,
Please record the serial number of this unit in the space
etc. in order not to obstruct heat radiation. If the temperature
below.
inside this unit rises, it may cause fire, damage to this unit,
MODEL:
and/or personal injury.
Serial No.:
7 Do not plug in this unit to a wall outlet until all connections
The serial number is located on the bottom of the unit.
are complete.
Retain this guide and Owner's Manual in a safe place
8 Do not operate this unit upside-down. It may overheat,
for future reference.
possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
The label is located on the bottom of this unit.
10 When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury. Yamaha
will not be held responsible for any damage resulting from use
of this unit with a voltage other than specified.
13 To prevent damage by lightning, keep the power cord and
outdoor antennas disconnected from a wall outlet or the unit
during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
16 Install this unit near the AC outlet and where the AC power
plug can be reached easily.
17 Be sure to read the "Troubleshooting" section on common
operating errors before concluding that this unit is faulty.
18 Before moving this unit, press to set this unit to the standby
mode, and disconnect the AC power plug from the AC wall
outlet.
Information about free software
This product uses the following free software.
For information (copyright, etc) about each software, read the original sentences stated below.
About curl
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2007, Daniel Stenberg, <daniel@haxx.se>.
All rights reserved.Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the
above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY
RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in
this Software without prior written authorization of the copyright holder.
Copyright (c) 1995, 1996, 1997, 1998, 1999 Kungliga Tekniska Högskolan (Royal Institute of Technology, Stockholm, Sweden).
Copyright (c) 2004 - 2007 Daniel Stenberg
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/
or other materials provided with the distribution.
3. Neither the name of the Institute nor the names of its contributors may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
About lwip
Copyright (c) 2001, 2002 Swedish Institute of Computer Science.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/
or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
About OpenSSL
LICENSE ISSUES
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See
below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please
contact openssl-core@openssl.org.
OpenSSL License
Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/
or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior
written permission. For written permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the
OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson
(tjh@cryptsoft.com).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code
found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is
covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young
should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation
(online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/
or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
"This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)"
The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:
"This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied
and put under another distribution licence [including the GNU Public Licence.]
About FLAC codec library
Copyright (C) 2000,2001,2002,2003,2004 Josh Coalson
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/
or other materials provided with the distribution.
- Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
About Vorbis library
Copyright (c) 2001, Xiphophorus
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/
or other materials provided with the distribution.
- Neither the name of the Xiphophorus nor the names of its contributors may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Notice for Windows Media DRM
The Certified For Windows Vista logo, Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the
United States and/or other countries.
Content providers are using the digital rights management technology for Windows Media contained in this device (WMDRM) to protect the integrity of
their content (Secure Content) so that their intellectual property, including copyright, in such content is not misappropriated.
This device uses WM-DRM software to play Secure Content (WM-DRM Software).
If the security of the WM-DRM Software in this device has been compromised, owners of Secure Content (Secure Content Owners) may request that
Microsoft revoke the WM-DRM Software s right to acquire new licenses to copy, display and/or play Secure Content. Revocation does not alter the WM-
DRM Software s ability to play unprotected content. A list of revoked WM-DRM Software is sent to your device whenever you
download a license for Secure Content from the Internet or from a PC. Microsoft may, in conjunction with such license, also download revocation list
onto your device on behalf of Secure Content Owners.
© 2009 Yamaha Corporation All rights reserved.