Information On Hdmi - Yamaha YMC S21 - neoHD AV System Owner's Manual

Glossary

Information on HDMI™

This unit has three HDMI input jacks and an HDMI output
jack for digital audio and video signal input/output.
■ HDMI jack and cable plug
HDMI
y
• We recommend that you use a commercially available HDMI
cable shorter than 5 meters (16 feet) with the HDMI logo
printed on it.
• Use a conversion cable (HDMI jack
this unit to other DVI components.
• If you set "HDMI Standby Through" in "Option" to "HDMI 1",
"HDMI 2" or "HDMI 3", this unit allows the HDMI signals
input at the corresponding HDMI IN jack to pass through this
unit and be output from the HDMI OUT jack.
Notes
• Do not disconnect or connect the cable or turn off the power of
the HDMI component connected to the HDMI OUT jack of this
unit while data is being transferred. Doing so may disrupt
playback or cause noise.
• The HDMI OUT jack outputs the audio signals input at the
HDMI input jacks only.
• If you turn off the TV connected to the HDMI OUT jacks via a
DVI connection, the connection may fail.
■ HDMI signal compatibility with this unit
Audio signals
Audio signal Audio signal
types formats
2ch Linear 2ch, 32-192 kHz,
PCM
16/20/24 bit
Multi channel 8ch, 32-192 kHz,
Linear PCM 16/20/24 bit
Bitstream Dolby Digital,
DTS
Bitstream (High Dolby TrueHD,
definition Dolby Digital Plus
audio)
y
Refer to the owner's manual of the input source component and
set the component appropriately.
54
En
Notes
• When CPPM copy-protected DVD audio is played back, video
• This unit is not compatible with non HDCP compliant HDMI or
HDMI cable plug
• To decode bitstream audio signals on this unit, you may need to
Video signals
This unit is compatible with video signals of the following
resolutions:
↔
DVI-D jack) to connect
Compatibility with Deep Color and x.v.Color
video signals
This unit accepts Deep Color (30 or 36-bit) and x.v.Color
video signals.
Note
If the TV is not compatible with Deep Color or x.v.Color video
signals, the video source may not be played back correctly.
Compatible
media
CD, DVD-Video,
DVD-Audio, etc.
DVD-Audio,
Blu-ray Disc,
HD DVD, etc.
DVD-Video,
Blu-ray Disc,
HD DVD
Blu-ray Disc,
HD DVD, etc.
and audio signals may not be output, depending on the type of
DVD player being used.
DVI components.
change some settings on the source component.
– 480i/60 Hz
– 576i/50 Hz
– 480p/60 Hz
– 576p/50 Hz
– 720p/60 Hz, 50 Hz
– 1080i/60 Hz, 50 Hz
– 1080p/60 Hz, 50 Hz, 24Hz