Resetting The Mcx-2000 For Factory Settings; Updating The Mcx-2000 Firmware - Yamaha MCX-2000 - MusicCAST Digital Audio Server Setup Manual

Resetting the MCX-2000 for Factory Settings

1 From the System Utilities menu, select System Reset.
n As shown in the screen, the purpose of resetting the MCX-2000 is to
initialize all parameter values. When you reset the MCX-2000, any
existing songs, playlists and bookmarks in your music archive are
preserved, except for radio presets (initialized to factory settings). The
system reset process also initializes the MCX-2000 internal clock, so
note that existing timer playback programs are lost and initialized to
factory settings. In addition, if you reset the MCX-2000 to reconfigure
your MusicCAST network, see "Initializing Network Settings"
(page 100). If you just want to manage your music archive (such as
deleting unnecessary songs), see "Editing the Library" (page 75).
2 To start resetting the MCX-2000, select Start from the
Submenu.
3 A confirmation dialog box appears. When you select
OK, the "Resetting..." message is shown and the
MCX-2000 restarts itself.
Another confirmation dialog box appears, telling that the
internal clock and timer has been reset. When you select OK,
the MCX-2000 automatically starts the Easy Setup process,
showing the same screen shown when you turned on the
MCX-2000 for the first time. Configure the MCX-2000
according to your environment, and newly create your
MusicCAST network by registering MusicCAST clients
(page 27).

Updating the MCX-2000 Firmware

Notes on Firmware update
When you update the MCX-2000 firmware, be sure to read the
document that comes with the firmware update CD. This
document contains the latest information on new features and
any changes after updating the firmware, other important
notices or additional procedure to the following update process.
1 Press the OPEN/CLOSE button on the remote control or
on the front panel and open the CD tray. Set the
firmware update CD with its label side facing up. Press
the same button again to close the tray.
STAMDBY/ON
POWER
STAMDBY/ON
AMP/TV
TV AMP
TIMER OPEN/CLOSE
TV AMP
RANDOM REPEAT BROADCAST RADIO
1 2 3
TIMER OPEN/CLOSE
4 5 6
7 8 9
0 TOP PLAU
MENU INFO.
PAGE A
SELECT
PAGE Z
VOL. INPUT
RANDOM REPEAT BROADCA
BOOLMARK
AMP/TV
MUTE
LIBRALY ARTSTS PLAULISTS
MENU 1 MENU 2 MENU 3
FAVORITES
1 2 3 4
Remote control
2 From the System Utilities menu, select System Update.
3 Update the MCX-2000 firmware according to the
message shown in the screen. Normally, update
process takes approximately 10 minutes.
n Along with the MCX-2000 firmware update, you may need firmware
update of each MusicCAST client. For details, read the document that
comes with the firmware update CD.
MCX-2000 Owner's Manual
103