Limiting Local Operations On The Mcx-2000 - Yamaha MCX-2000 - MusicCAST Digital Audio Server Setup Manual

Limiting Local Operations on the MCX-2000

1 From the System Utilities menu, select Lock Function.
The password entry dialog box appears, prompting you
to enter a predefined password. Select OK after entry.
Password entry dialog box
For password entry, use the on-screen character palette or a
PS/2 keyboard connected to the MCX-2000 front panel.
Each password character will be shown with an asterisk (*).
n When you use this function for the first time, enter "mcx-2000" in
lowercase (factory setting).
2 When you enter a correct password, the MCX-2000
shows the following screen where you can specify which
operation is password-locked. Select Lock ON if you
want to limit access to their relevant operations.
Password-lock selection screen
1 Setup
Limits access to each setup parameter available under
Setup (Top Menu > Setup).
2 Edit function
Limits access to all edit functions available under Library (Top
Menu > Library). These functions include any edit commands
from Submenu (Edit, Delete, Change, Add, Remove, New,
etc.) and the BOOKMARK button operations on the remote
control.
3 Recording
Limits access to all recording features available under
Recording (Top Menu > Recording) and the CD AUTO
STORE button operations on the remote control.
MCX-2000 Owner's Manual
104
4 CD tray open
Limits access to the built-in CD drive and the Open/Close
button operations on the remote control and MCX-2000
front panel.
5 Password
Define your own password to lock off functions specified
above. Your password must be up to 14 characters (case
sensitive).
n If you forgot your password, select Lock Function from System
Utilities (step 1 above). Enter all uppercase "MCAST" in the password
entry dialog box, and then select OK. This resets the password to its
factory setting (mcx-2000), and you can enter the password-lock
selection screen. In addition, the password will also be reset if you
reset the MCX-2000 (page 103).