Yamaha MCX-2000 - MusicCAST Digital Audio Server Setup Manual page 76

1 Select the Save to Preset command from the Submenu.
A group selection dialog box appears, where you can
assign the current radio station into a specific group.
Current radio station (FM frequency, etc.)
n There are no limitations on which group and position the current radio
station should be registered to. You can register radio stations even at
random; however, unlike playlist songs, you cannot change the group
and position of radio stations after registration. For this reason, you
should consider beforehand how to categorize radio stations in the
Presets list.
2 Move the selection (highlight) to the desired group, and
then press the SELECT button on the cursor controller.
The second dialog box appears, where you can place the
current radio station into the selected group.
Selected group
n You can re-select another group if you go back to the previous dialog
box, by pressing the left arrow button on the cursor controller. If you
cancel the registration, simply press the right arrow button (Quit).
MCX-2000 Owner's Manual
60
Current radio station
(FM frequency, Internet URL, etc.)
3 Move the selection (highlight) to the desired position, and
then press the SELECT button on the cursor controller.
The selected position flashes several times with a station
code. When you return to the Play Information screen,
registration is complete.
Registered station code (FM frequency, XM channel, IR for Internet radio)
n Any existing station in the selected position is overwritten when you
press the SELECT button. You can edit group and station names later
in the Presets screen (page 85).
Playing a Radio Station from the Presets List
It's exceptionally easy to select and play a radio station from
the Presets list.
1 From the Radio menu screen (page 54), select Presets.
A list of preset groups is shown in the screen. Move the
selection (highlight) to the desired group.
Preset groups
n When you press the Play button on the remote control or select the
Play command from the Submenu, the MCX-2000 starts receiving a
broadcast from the radio station last selected in the current group.
In addition, you can edit group names using the Edit title command
(page 85).