Yamaha MCX-2000 - MusicCAST Digital Audio Server Setup Manual page 74

Also in the Submenu, you can select Direct Access if you know
the desired channel number.
Specify the desired channel number by pressing the on-screen
numeric buttons, followed by OK. Press CLR to clear your entry.
Wait for a few seconds until the MCX-2000 automatically tunes in
to that channel.
n Pressing any buttons other than the numeric buttons cancels
Direct Access entry.
Screen Messages for XM Radio
The MCX-2000 may show one of the following messages in the Play Information screen for XM radio. Read each description
and handle each situation as recommended.
Message
CHECK ANTENNA
UPDATING
NO SIGNAL
LOADING
OFF AIR
CHANNEL - - -
- - -
- - -
- - -
MCX-2000 Owner's Manual
58
Direct Access entry dialog
Description
Your XM Connect-and-Play antenna is not
connected, or does not work properly.
The XM user encryption code is being updated.
The signal is too weak.
The audio or text data decoding process takes
longer than four seconds.
The XM Satellite Radio channel you selected is
not currently broadcasting any signal.
The channel station ID (SID) is no longer
available.
No artist name/feature or song/program title is
available.
No channels are available for the selected
category.
Action/Solution
Check that your XM Connect-and-Play antenna is
properly connected.
Wait until the encryption code is completely updated.
Check the XM Connect-and-Play antenna connections
and position the antenna for the best reception.
Wait until the decoding process is finished.
Check the channel number or select another XM Satellite
Radio channel.
Check the channel number or select another XM Satellite
Radio channel.
Artist name is not sometimes available through a satellite
signal for display.
Category name is not sometimes available through a
satellite signal for display.