Yamaha MCX-2000 - MusicCAST Digital Audio Server Setup Manual page 78

Registering FM Stations Automatically to the
Presets List
You can search for an FM radio station in the Play Information
screen, which is a basic radio tuning function. In the Preset
station list screen, you can use a similar scanning process to
locate all available stations within a specific frequency range
and register them all in the Presets list—in a single automatic
process. This lets you easily create your own FM preset list.
1 From the Radio menu screen (page 54), select Presets.
Consecutively press the SELECT button on the remote
control until you see a list of preset stations in the screen.
(You can select any preset group.)
Station list
2 Select the FM Auto Preset command from the Submenu
for the following dialog box.
3 Select and specify the Starting Frequency value where the
MCX-2000 starts scanning at, and the Starting Preset
position where you want FM stations found in the
scanning process to be registered from. Use the up and
down arrow buttons (
change values, as well as the left and right arrow buttons
( / ) to move between group (A~J) and position (1~10).
j i
MCX-2000 Owner's Manual
62
FM Auto Preset dialog box
) on the cursor controller to
/
u d
4 Select Start in the dialog box to start automatic scanning and
registration of FM stations. The station list of the specified
group is shown with "Searching..." at the specified position.
Progress bar
Searching for an FM station to be registered at this position
The progress bar indicates the scanning is ongoing while
increasing the frequency. Each station that's found is
automatically registered to the current position, and
"Searching..." moves to the next position.
n Any existing station in the "Searching..." position is overwritten when
a new station is registered. When registration reaches to the last
position (J10), the FM Auto Preset process finishes at that point. If you
want to cancel the process, press the Stop button or the left arrow
button on the cursor controller.
5 When "Complete" is shown at the progress bar, the FM
Auto Preset process is finished. You will return to the
station list screen (the last registered station will be
highlighted).
n You can also edit station names using the Edit title command
(page 85).