Preparation On The Mcx-2000 - Yamaha MCX-2000 - MusicCAST Digital Audio Server Setup Manual

Preparation on the MCX-2000

1 Select Top Menu > Setup > Network.
2 From the Network menu, select Client Registration > Auto Configuration.
3 Open the Submenu in the Auto Configuration screen. Select Start from the menu.
When the MCX-2000 starts searching available clients, register them within 30 minutes. With this screen shown on the
MCX-2000, go and prepare each client.
n
When you see the "Cannot confirm IP address" message in the screen, there is no external DHCP server that assigns IP addresses to the
MCX-2000 and MusicCAST clients. In this case, the MCX-2000 automatically enters DHCP Server mode (page 37). Simply select OK in the dialog
box to continue auto configuration. Select Cancel if you want to set up an external DHCP server. Auto Configuration is canceled.
MCX-2000 Owner's Manual
32
MCX-2000 continues searching clients for 30 minutes