HP j6700 - Workstation Service Handbook page 65

Table 3-1. Chassis Codes for J6700 Workstations
Ostat Code FRU
WRN CB73 SYS BD
FLT CB9r IO BD
FLT CB99 SYS BD
FLT CB9A SYS BD
OFF CBA1 SYS BD
OFF CBA2 IO BD
OFF CBA3 SYS BD
OFF CBA4 IO BD
OFF CBA5 IO BD
OFF CBA6 IO BD
OFF CBA7 IO BD
OFF CBB1 IO BD
OFF CBB2 IO BD
OFF CBB3 IO BD
OFF CBB4 IO BD
OFF CBB6 IO BD
OFF CBB8 IO BD
OFF CBBA IO BD
OFF CBBC IO BD
OFF CBBE IO BD
OFF CBC0 IO BD
Chapter 3
Message
TOC occurred
Error on roper
seed IVA handler
HPMC overwrite
AIOC int dat err
EtoA rope perr
access invld TLB
EtoA rp cmd perr
CDF timeout
R2PCI resp tmout
Unknown AIOC err
PCI timeout
PCI timeout; OV
R2PCI intrnl err
R2PCI int err;OV
PCI data req err
PCI D req err;OV
PCI data par err
PCI Dpar err;OV
R2PCI intrnl err
R2PCI int err;OV
Identifying LCD-Indicated Conditions
Description
A Transfer of Control caused entry to
PDCE_CHECK (the firmware trap
handler).
An error was detected on rope r.
PDC_SEED_ERROR triggered an HPMC.
Firmware is overwriting PIM data from a
previous HPMC.
I/O controller internal error.
Parity error between I/O controller and
Rope-to-PCI bridge.
An invalid I/O TLB entry was accessed.
Command parity error between I/O
controller and Rope-to-PCI bridge.
Rope Command/Data FIFO is backed up.
Rope-to-PCI bridge timed out. Could be a
failure of the PCI card, rope, or R2PCI
bridge.
Unknown I/O controller error.
A PCI card requested the bus but failed to
use it.
More than once aPCI card requested the
bus but failed to use it.
Rope-to-PCI bridge internal error.
Multiple Rope-to-PCI bridge internal
errors.
PCI bus data requestor error: R2PCI
detected PERR# assertion.
Rope-to-PCI bridge detected multiple
PERR# assertions.
PCI bus data parity error.
Multiple PCI bus data parity errors.
Error in R2PCI internal data to PCI bus.
Multiple R2PCI internal data to PCI bus
errors.
Troubleshooting
65