Cd-Rom Drive Problems - Compaq AP500 - Professional - 128 MB RAM Reference Manual

CD-ROM Drive Problems

System will not boot from
CD-ROM drive.
Data read from CD-ROM
drive is inconsistent or
drive cannot read data
CD-ROM devices are not
detected, driver is not
loaded.
Solving CD-ROM Drive Problems
Problem
The CD-ROM boot is not
enabled through the Setup
utility.
Paper or plastic label has
been applied to surface of the
CD in use.
CD-ROM drive is not
connected properly or not
properly terminated.
Table 11-9
Possible Cause
Compaq Professional Workstation AP500 Reference Guide
Possible Solution
Run the Setup utility and
set the drive priorities.
Remove label and any
adhesive residue.
Refer to the
documentation included
with the CD-ROM.
11-15