Compaq AP500 - Professional - 128 MB RAM Reference Manual page 19

Ref. Component
1 Power on/off LED
2 Power button
3 Hard drive activity LED
4 Network activity LED
5 Bay 4 - CD-ROM drive
6 Bay 5
7 Bay 6
8 Bay 7 - diskette drive
9 Speaker
Table 1-2
Front Panel Components
After plugging the power cord into a grounded AC
outlet and the workstation, if the LED is:
Off - Workstation is ready to be powered up.
Steady Amber - The expansion board assembly is
not seated properly.
After pressing the power button, if the LED is:
Steady Green - Workstation is turned on, and the
expansion board assembly is seated properly.
Blinking green - Workstation is in standby mode
Turns the workstation on or off
When lit, indicates the workstation is reading or
writing data to the hard drive(s)
When lit, indicates the workstation is receiving
or sending data on the network
5.25-inch, half-height drive bay
5.25-inch, half-height drive bay
5.25-inch, half-height drive bay
3.5-inch, third-height drive bay
PremierSound with fixed equalization
Compaq Professional Workstation AP500 Reference Guide
Description
1-7