Accessing The Web User Interface - Panasonic KX-UT133-B Administrator's Manual

1.1.6 Web User Interface Programming
•
The IDs can be changed through configuration file programming (® see "ADMIN_ID" and
"USER_ID" in 5.3.1 Login Account Settings).
•
You can reset the account IDs and passwords to their factory default settings by performing Reset Web
ID/Password from the unit. For details, see 3.1.4 Reset Web ID/Password.

1.1.6.4 Accessing the Web User Interface

The unit can be configured from the Web user interface.
To access the Web user interface
1.
Open your Web browser, and then enter "http://" followed by the unit's IP address into the address field of
your browser.
Note
•
To determine the unit's IP address, perform the following operations on the unit:
1.
Setting
2. [ ]/[ ]: Select "Information Display" ® [ENTER]
3.
[ ]/[ ]: Select "IP address"
4.
[CANCEL]
2.
For authentication, enter your ID (username) and password, and then click OK.
Notice
•
The default ID for the User account is "user", and the default password is blank. The ID cannot be
changed from the Web user interface, but it can be changed through configuration file
programming.
•
When you log in as User to the Web user interface for the first time, the [Change User
Password] screen (® see 4.4.3 Change User Password) will be displayed. Enter a new
password, and then perform authentication again with the new password to log in to the Web user
interface.
•
The default ID for the Administrator account is "admin", and the default password is "adminpass".
The ID cannot be changed from the Web user interface, but it can be changed through configuration
file programming.
3.
The Web user interface window is displayed. Configure the settings for the unit as desired.
4.
You can log out from the Web user interface at any time by clicking [Web Port Close].
22 Administrator Guide
or (soft button)
Setup
Document Version 2011-06