4.5.2 SIP Settings [Line 1]–[Line 4]
Value Range
Default Value
Configuration File Reference
4.5.2.6 SIP Authentication
Authentication ID
Description
Value Range
Default Value
Configuration File Reference
Authentication Password
Description
Value Range
Default Value
Configuration File Reference
4.5.2.7 DNS
Enable DNS SRV lookup
Description
96
Administrator Guide
1024–49151
Note
•
You cannot specify here the same port number as any of the
port numbers in [Channel 1–25] in 4.3.5.3 External RTP
Port (if they are configured). In addition, you cannot specify a
port number that is 1 greater than a port number specified in
[Channel 1–25].
•
The available channel number varies depending on the type of
the unit being used.
•
The SIP port number for each line must be unique.
•
You cannot specify the same port number as the port number
specified in [Web Server Port] in 4.4.4.1 Web Server
Settings.
5060 (for Line 1)
5070 (for Line 2)
5080 (for Line 3)
5090 (for Line 4)
SIP_SRC_PORT_n (Page 214)
Specifies the authentication ID required to access the SIP server.
Max. 127 characters (except ", &, ', :, <, >, and space)
Not stored.
SIP_AUTHID_n (Page 214)
Specifies the authentication password used to access the SIP server.
Max. 127 characters (except ", &, ', :, <, >, and space)
Not stored.
SIP_PASS_n (Page 214)
Selects whether to request the DNS server to translate domain names
into IP addresses using the SRV record.
Document Version
2011-06