4.6.4 Tone Settings
Label Name (No. 1–24)
Description
Value Range
Default Value
Configuration File Reference
4.6.4 Tone Settings
This screen allows you to configure the dual-tone frequencies and ring tone patterns of each tone.
4.6.4.1 Dial Tone
Tone Frequencies
Description
Value Range
Default Value
122
Administrator Guide
Specifies the message to be displayed on the screen when the flexible
button is pressed.
Max. 10 characters
Note
•
You can use Unicode characters for this setting.
Not stored.
FLEX_BUTTON_LABELx (Page 200)
Specifies the dual-tone frequencies, in hertz, of dial tones using 2 whole
numbers separated by a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "350,440", the unit will use a mixed
signal of a 350 Hz tone and a 440 Hz tone.
350,440
Document Version
2011-06