Value Range
Default Value
Configuration File Reference
Telephone-event Payload Type
Description
Value Range
Default Value
Configuration File Reference
Document Version
2011-06
1424–49150 (even number only)
Note
•
The value for this setting must be greater than or equal to
"[Minimum RTP Port Number] + 400".
•
Changing this setting may affect the number of simultaneous
calls that can be made. Therefore, when setting this parameter,
be aware that the maximum number of necessary ports can be
calculated as shown below:
No. of lines ´ No. of channels ´ 2 ´ 10 (No. of terminals)
20000
RTP_PORT_MAX (Page 204)
Specifies the RFC 2833 payload type for DTMF tones.
Note
•
This setting is available only when [DTMF Type] is set to
[Outband].
96–127
101
TELEVENT_PAYLOAD (Page 206)
4.5.3 VoIP Settings
Administrator Guide
103