Symantec 10551441 - AntiVirus Corporate Edition Client Manual page 58

58 Protecting your computer from viruses and security risks
Configuring scanning
3 Select one of the following types of scan to schedule:
Quick Scan
■
Full Scan
■
Custom Scan
■
4 Click Next.
5 Type a name and description for the scan.
6 Click Next.
7 If you selected Custom Scan, then in the right pane, check the appropriate
check boxes to specify where to scan.
You can check anything from the entire computer to a single file.
See "Initiating manual scans"
8 Click Options to change the default settings for what is scanned and how to
respond if a virus or a security risk is detected.
The default settings are as follows:
The default setting is to scan all files.
■
For viruses, the default settings for actions are to clean the virus from
■
an infected file and repair its effects, and quarantine the infected file if
the virus cannot be removed.
For security risks, the default settings for actions are to quarantine the
■
security risk and remove or repair its side effects, and log the risk if it
cannot be quarantined and repaired.
To apply the modified settings only to the current scan, click OK. To apply
the settings to all future scans, click Save Settings.
9 Click Advanced to configure a scan progress dialog box to appear during
the startup scan.
10 In the Scan Advanced Options dialog box, under Dialog options, in the drop-
down list, click Show scan progress, and then click OK.
11 In the Scan Options dialog box, click OK.
12 In the Symantec AntiVirus main window, click Save.
The scan runs every time that you start your computer and Windows loads.
on page 52.