Adjusting The Needle Up Stop Position - Brother S-7200C Instruction Manual

8. USING THE G10 OPERATION PANEL (ADVANCED OPERATIONS)

8-6. Adjusting the needle up stop position

1
(While pressing the
Selecting "UPoS"
2
(Press once)
Needle up stop position setting
3
4
5
* For details on other adjustment items, refer to the Service Manual.
39
key (1), press the power ON switch.)
(Setting item)
(Setting value)
Becomes higher
Becomes lower
(Setting item)
"MorG" will appear in the display (2).
Example:
・ If you press the
increase and the needle up stop position will
become lower.
・ If you press the
decrease and the needle up stop position will
become higher.
・ The setting range is from –10 to 10.
* A setting value of "10" corresponds to an angle of
rotation of approximately 10° for the upper shaft.
The setting will be stored and the display will return
to the setting item.
Normal sewing machine operation will then be
possible.
S-7200C
4217M
2138M
4218M
key, the setting value will
key, the setting value will
4219M 2138M 2139M
4220M
4206M