6-4. Resetting all settings to their defaults
If the sewing machine stops operating normally, the cause may be that an incorrect setting may have been made for the
memory data by means of memory switches, for instance. In such cases, it may be possible to restore normal operation by
following the steps given below to initialize the memory setting data.
Activating initialization mode
While pressing the RESET key, press the power ON switch.
(Press for 2 seconds or more)
6. USING THE G50 OPERATION PANEL (ADVANCED OPERATIONS)
Once initialization is complete, the main display will return to green.
Initialization mode will be exited and normal sewing machine operation will then
"init ALL" will appear in orange in the main display (1).
If the X
keys (2) are pressed at this time, you can
select the items to be initialized as shown
For details on initialization items other than "init ALL",
refer to the Service Manual.
" init ALL "
" init MEM "
" init SPd "
" init SEW "
Clears all settings
Initializes memory switches
Initializes sewing speed