Using The G10 Operation Panel (Basic Operations); Names And Functions - Brother S-7200C Instruction Manual

7. USING THE G10 OPERATION PANEL (BASIC OPERATIONS)

7. USING THE G10 OPERATION PANEL
(BASIC OPERATIONS)

7-1. Names and functions

・ The operation panel keys cannot be operated while sewing is in progress.
Select the keys and set the number of stitches before starting sewing.
・ In the case of keys with indicators, the indicator illuminates when that function is operating, and the indicator switches off
when the key is pressed once more.
The power indicator illuminates when the power switch is turned on.
(1) Display
(2) Setting keys
(3) Start backtack key
(4) End backtack key
(5) Continuous backtack key
(6) Thread wiper key
31
・ When start backtack stitches are being displayed, the indicator of the start backtack key
(3) will illuminate, and the number of A stitches will appear in the A column and the
number of B stitches will appear in the B column.
・ When end backtack stitches are being displayed, the indicator of the end backtack key
(4) will illuminate, and the number of C stitches will appear in the C column and the
number of D stitches will appear in the D column.
・ When continuous backtack stitches are displayed, the indicator of the continuous
backtack key (5) will illuminate, and the number of A, B, C and D stitches will appear in
order starting from the left column of the display.
These keys are used to set the number of backtack stitches for A, B, C and D.
・ When the key is pressed, the setting increases from 0 up to 9.
・ When the key is pressed, the setting decreases from 9 down to 0.
When this key is pressed so that the indicator illuminates, the number of start backtack
stitches (0 - 9) in the A and B columns of the display are sewn.
When this key is pressed so that the indicator illuminates, the number of end backtack
stitches (0 - 9) in the C and D columns of the display are sewn. When the treadle is
depressed backward, the end backtack stitches are sewn and then the thread is trimmed
automatically.
If the treadle has not yet been depressed backward, the end backtack function can be set
to ON, the number of stitches can be changed and the function can be set back to OFF.
When this key is pressed so that the indicator illuminates, the number of backtack stitches
(0 - 9) in the A, B, C and D columns of the display are sewn continuously. After the sewing
machine sews a full cycle of stitches set by A, B, C and D, the thread is trimmed
automatically.
・ When this key is pressed so that the indicator illuminates, the thread wiper (-4[][]
specifications) operates. (Refer to "4-7. Using the thread wiper".)
・ If the thread trimming lock has been set, the thread wiper key (6) will be disabled. (For
details on the thread trimming lock, refer to "8-4. Thread trimming lock".)
・ If thread trimming lock is set when the indicator of this key is illuminated, the indicator of
the thread wiper key (6) will switch off.
S-7200C
Power indicator
Refer to p.38
4197M
4198M
4199M 2138M 2139M
4161M
4162M
4163M
4174M