Download  Print this page

Using The G50 Operation Panel (basic Operations); Names And Functions - Brother S-7200C Instruction Manual

Single needle direct drive straight lock stitcher with thread trimmer.
Hide thumbs

Advertisement

5. USING THE G50 OPERATION PANEL (BASIC OPERATIONS)

5. USING THE G50 OPERATION PANEL
(BASIC OPERATIONS)

5-1. Names and functions

• The operation panel keys cannot be operated while sewing is in progress.
Select the keys and set the number of stitches before starting sewing.
• In the case of keys with indicators, the indicator illuminates when that function is operating, and the indicator switches off
when the key is pressed once more.
The power indicator illuminates when the power switch is turned on.
(1)
Main display
(2)
Setting keys
(3)
Start backtack key
(4)
End backtack key
(5)
Continuous backtack key
(6)
Fixed stitch key
19
• In start backtack display, AB illuminates and the number of stitches for A and B are
displayed.
• In end backtack display, CD illuminates and the number of stitches for C and D are
displayed.
• In continuous backtack display, ABCD illuminates and the number of stitches for A, B, C
and D are displayed.
• In fixed stitch display, E or F illuminates and the number of stitches for E or F are
displayed.
These keys are used to set the number of backtack stitches for A, B, C and D and the
number of fixed stitches for E and F.
• When the
key is pressed, the setting increases from 0 up to 99.
• When the
key is pressed, the setting decreases from 99 down to 0.
When this key is pressed so that the indicator illuminates, the number of start backtack
stitches (0−99) in the A and B stitch number displays is sewn.
When this key is pressed so that the indicator illuminates, the number of end backtack
stitches (0−99) in the C and D stitch number displays is sewn. When the treadle is
depressed backward, the end backtack stitches are sewn and then the thread is trimmed
automatically.
If the treadle has not yet been depressed backward, the end backtack function can be set
to ON, the number of stitches can be changed and the function can be set back to OFF.
When this key is pressed so that the indicator illuminates, the number of backtack stitches
(0−99) in the A, B, C and D stitch number displays is sewn continuously. After the sewing
machine sews a full cycle of stitches set by A, B, C and D, the thread is trimmed
automatically.
When this key is pressed so that the indicator illuminates, the number of stitches (1-1999)
in the E stitch number display is sewn, and then the sewing machine stops automatically.
S-7200C
Power indicator
4159M
2136M
4160M 2138M 2139M
4161M
4162M
4163M
4164M

Advertisement

Table of Contents

   Also See for Brother S-7200C

   Related Manuals for Brother S-7200C

Comments to this Manuals

Symbols: 0
Latest comments: