Adjusting The Needle Up Stop Position - Brother S-7200C Instruction Manual

6-2. Adjusting the needle up stop position

1
(While pressing the
Selecting "UpoS xxx"
2
(Press once)
3 Needle up stop position setting
4
5
* For details on other adjustment items, refer to the Service Manual.
key (1), press the power ON switch.)
(Setting value)
Example:
Becomes higher
Becomes lower
The setting values will be memorized.
Normal sewing machine operation will then be possible.
6. USING THE G50 OPERATION PANEL (ADVANCED OPERATIONS)
"MorG xxx" will appear in orange in the main display (2).
"xxx" is the setting value for the needle up stop position, and
"0" is the default setting.
•
If you press the
and the needle up stop position will become lower.
•
If you press the
and the needle up stop position will become higher.
•
The setting range is from –10 to 10.
* A setting value of "10" corresponds to an angle of rotation
of approximately 10° for the upper shaft.
S-7200C
key, the setting value will increase
key, the setting value will decrease
4191M 2138M 2139M
4189M
4190M
4192M
4193M
28